Chimonobambusafarcta (Poaceae, Bambusoideae), a new species from western Guangxi, China with taxonomic notes on C.pubescens and C.luzhiensis.

Chimonobambusafarcta, a new species of temperate woody bamboos from western Guangxi, China is described and illustrated. The new species is similar to C.pubescens in the solid internodes of culms, but differs in having taller culm to 7 m with longer verrucose internodes to 23.5 cm and intranodes to 4 mm, intranode usually with a ring of 7-9 root thorns below mid-culm, abaxially brown or brown-purple verrucose-setose culm leaf sheaths with indistinct transverse veins, conspicuously developed culm leaf blades to 3.2 cm long, longer foliage leaf sheaths to 5.2 cm, larger and broader foliage leaf blades to 22 × 1.4 cm. It also somewhat resembles C.convoluta, but can be easily distinguished by having solid internodes and longer intranode 2-4 mm, very prominent nodes with supranodal ridge obviously more elevated than sheath scar, usually persistent and sometimes brownish striate culm leaf sheaths, longer culm leaf blades to 3.2 cm, and abaxially glabrous foliage leaf sheaths. Based on the morphological characteristics, this new species is assigned to C.sect.Chimonobambusa. The character description of C.pubescens are revised for its culm to 2.1 m tall, 1.1 cm in diameter and glabrous foliage leaf blades. The systematic position of C.luzhiensis is discussed, and this species is proposed as a member of C.sect.Chimonobambusa.

DNA-free CRISPR-Cas9 gene editing of wild tetraploid tomato Solanum peruvianum using protoplast regeneration.

Wild tomatoes (Solanum peruvianum) are important genomic resources for tomato research and breeding. Development of a foreign DNA-free clustered regularly interspaced short palindromic repeat (CRISPR)-Cas delivery system has potential to mitigate public concern about genetically modified organisms. Here, we established a DNA-free CRISPR-Cas9 genome editing system based on an optimized protoplast regeneration protocol of S. peruvianum, an important resource for tomato introgression breeding. We generated mutants for genes involved in small interfering RNAs biogenesis, RNA-DEPENDENT RNA POLYMERASE 6 (SpRDR6), and SUPPRESSOR OF GENE SILENCING 3 (SpSGS3); pathogen-related peptide precursors, PATHOGENESIS-RELATED PROTEIN-1 (SpPR-1) and PROSYSTEMIN (SpProSys); and fungal resistance (MILDEW RESISTANT LOCUS O, SpMlo1) using diploid or tetraploid protoplasts derived from in vitro-grown shoots. The ploidy level of these regenerants was not affected by PEG-Ca2+-mediated transfection, CRISPR reagents, or the target genes. By karyotyping and whole genome sequencing analysis, we confirmed that CRISPR-Cas9 editing did not introduce chromosomal changes or unintended genome editing sites. All mutated genes in both diploid and tetraploid regenerants were heritable in the next generation. spsgs3 null T0 regenerants and sprdr6 null T1 progeny had wiry, sterile phenotypes in both diploid and tetraploid lines. The sterility of the spsgs3 null mutant was partially rescued, and fruits were obtained by grafting to wild-type (WT) stock and pollination with WT pollen. The resulting seeds contained the mutated alleles. Tomato yellow leaf curl virus proliferated at higher levels in spsgs3 and sprdr6 mutants than in the WT. Therefore, this protoplast regeneration technique should greatly facilitate tomato polyploidization and enable the use of CRISPR-Cas for S. peruvianum domestication and tomato breeding.

Protoplasts: From Isolation to CRISPR/Cas Genome Editing Application.

In the clustered regulatory interspaced short palindromic repeats (CRISPR)/CRISPR associated protein (Cas) system, protoplasts are not only useful for rapidly validating the mutagenesis efficiency of various RNA-guided endonucleases, promoters, sgRNA designs, or Cas proteins, but can also be a platform for DNA-free gene editing. To date, the latter approach has been applied to numerous crops, particularly those with complex genomes, a long juvenile period, a tendency for heterosis, and/or self-incompatibility. Protoplast regeneration is thus a key step in DNA-free gene editing. In this report, we review the history and some future prospects for protoplast technology, including protoplast transfection, transformation, fusion, regeneration, and current protoplast applications in CRISPR/Cas-based breeding.

How to start your monocot CRISPR/Cas project: plasmid design, efficiency detection, and offspring analysis.

The breakthrough CRISPR (clustered regularly interspaced short palindromic repeat)/Cas9-mediated genome-editing technology has led to great progress in monocot research; however, several factors need to be considered for the efficient implementation of this technology. To generate genome-edited crops, single guide (sg)RNA and Cas9 DNA are delivered into plant cells and expressed, and the predicted position is targeted. Analyses of successful targeted mutations have revealed that the expression levels, expression timing, and variants of both sgRNA and Cas9 need to be sophisticatedly regulated; therefore, the promoters of these genes and the target site positions are the key factors for genome-editing efficiency. Currently, various vectors and online tools are available to aid sgRNA design. Furthermore, to reduce the sequence limitation of the protospacer adjacent motif (PAM) and for other purposes, many Cas protein variants and base editors can be used in plants. Before the stable transformation of a plant, the evaluation of vectors and target sites is therefore very important. Moreover, the delivery of Cas9-sgRNA ribonucleoproteins (RNPs) is one strategy that can be used to prevent transgene issues with the expression of sgRNA and Cas proteins. RNPs can be used to efficiently generate transgene-free genome-edited crops that can reduce transgene issues related to the generation of genetically modified organisms. In this review, we introduce new techniques for genome editing and identifying marker-free genome-edited mutants in monocot crops. Four topics are covered: the design and construction of plasmids for genome editing in monocots; alternatives to SpCas9; protoplasts and CRISPR; and screening for marker-free CRISPR/Cas9-induced mutants. We have aimed to encompass a full spectrum of information for genome editing in monocot crops.

Flowering of Woody Bamboo in Tissue Culture Systems.

Flowering and subsequent seed set are not only normal activities in the life of most plants, but constitute the very reason for their existence. Woody bamboos can take a long time to flower, even over 100 years. This makes it difficult to breed bamboo, since flowering time cannot be predicted and passing through each generation takes too long. Another unique characteristic of woody bamboo is that a bamboo stand will often flower synchronously, both disrupting the supply chain within the bamboo industry and affecting local ecology. Therefore, an understanding of the mechanism that initiates bamboo flowering is important not only for biology research, but also for the bamboo industry. Induction of flowering in vitro is an effective way to both shorten the flowering period and control the flowering time, and has been shown for several species of bamboo. The use of controlled tissue culture systems allows investigation into the mechanism of bamboo flowering and facilitates selective breeding. Here, after a brief introduction of flowering in bamboo, we review the research on in vitro flowering of bamboo, including our current understanding of the effects of plant growth regulators and medium components on flower induction and how in vitro bamboo flowers can be used in research.

BeMADS1 is a key to delivery MADSs into nucleus in reproductive tissues-De novo characterization of Bambusa edulis transcriptome and study of MADS genes in bamboo floral development.

BACKGROUND: The bamboo Bambusa edulis has a long juvenile phase in situ, but can be induced to flower during in vitro tissue culture, providing a readily available source of material for studies on reproductive biology and flowering. In this report, in vitro-derived reproductive and vegetative materials of B. edulis were harvested and used to generate transcriptome databases by use of two sequencing platforms: Illumina and 454. Combination of the two datasets resulted in high transcriptome quality and increased length of the sequence reads. In plants, many MADS genes control flower development, and the ABCDE model has been developed to explain how the genes function together to create the different whorls within a flower. RESULTS: As a case study, published floral development-related OsMADS proteins from rice were used to search the B. edulis transcriptome datasets, identifying 16 B. edulis MADS (BeMADS). The BeMADS gene expression levels were determined qRT-PCR and in situ hybridization. Most BeMADS genes were highly expressed in flowers, with the exception of BeMADS34. The expression patterns of these genes were most similar to the rice homologs, except BeMADS18 and BeMADS34, and were highly similar to the floral development ABCDE model in rice. Transient expression of MADS-GFP proteins showed that only BeMADS1 entered leaf nucleus. BeMADS18, BeMADS4, and BeMADS1 were located in the lemma nucleus. When co-transformed with BeMADS1, BeMADS15, 16, 13, 21, 6, and 7 translocated to nucleus in lemmas, indicating that BeMADS1 is a key factor for subcellular localization of other BeMADS. CONCLUSION: Our study provides abundant B. edulis transcriptome data and offers comprehensive sequence resources. The results, molecular materials and overall strategy reported here can be used for future gene identification and for further reproductive studies in the economically important crop of bamboo.

Correlation between DNA methylation and chronological age of Moso bamboo (Phyllostachys heterocycla var. pubescens).

BACKGROUND: Chronological age is the primary consideration when studying the physiological development, aging, and flowering of bamboo. However, it's difficult to determine bamboo's chronological age if the time of germination is unknown. To investigate the chronological age of bamboo from the genomic DNA methylation profile, methylation-sensitive amplification polymorphism (MSAP) was employed to analyze the genomic DNA methylation of Moso bamboo (Phyllostachys heterocycla var. pubescens) from stands of nine germination-ages, using six primer pairs which have previously been shown to yield methylation rates that reflect the age of Moso bamboo. RESULTS: The results showed that the total genomic DNA methylation rates in Moso bamboo at different chronological ages were significantly different, and the increase in genomic DNA methylation rate was consistent with the increase of chronological age. Six primer pairs displayed different genomic DNA methylation rates in Moso bamboo of nine age's group; however, a significantly positive correlation existed among these primer pairs. An integrated index was obtained by performing principal component analysis on the six primer pairs to represent the genomic DNA methylation levels in Moso bamboo of various chronological ages, and a quadratic curve between the chronological age and genomic DNA methylation levels was obtained. CONCLUSIONS: Such a relationship between DNA methylation and its chronological age may serve a reference for its aging study in Moso bamboo.

Protocol for callus induction and somatic embryogenesis in Moso Bamboo.

Moso bamboo [Phyllostachys heterocycla var. pubescens (Mazel ex J. Houz.) Ohwi] is one of the most important forest crops in China and the rest of Asia. Although many sympodial bamboo tissue culture protocols have been established, there is no protocol available for plantlet regeneration as indicated by callus induction for monopodial bamboos, such as Moso bamboo. In the present report, embryogenic callus induction, embryoid development, and germination were established for Moso bamboo from zygotic seed embryos. Callus was initiated from zygotic embryos after 10-20 d culture on MS media supplemented with 4.0 mg/L 2, 4-D and 0.1 mg/L zeatin (ZT). About 50% of the explants produced calli, and nearly 15% of the calli were found to be embryogenic in nature. These embryogenic calli can be subcultured for proliferation in the Murashige and Skoog media (MS) supplemented with 0.5-2.0 mg/L 2, 4-D. These calli were found to have maintained their capacity for regeneration even after one year of subculture. The viable somatic embryoids regenerated in medium containing 5.0-7.0 mg/L ZT. Nearly 5% of the calli were found capable of regenerating into plantlets directly in MS medium containing 5.0-7.0 mg/L ZT. Root growth was more pronounced when the plantlets were transferred to medium containing 2.0 mg/L NAA. After 30 days of subculture, the plantlets were transferred to a greenhouse.